0
0
3D printing, often known as additive manufacturing, is the method of generating three-dimensional items from digital files, which may not
be useful for online gambling. There are several options for doing this. Fused deposition modeling (FDM) is one of the most popular 3D printing processes. Another option is stereolithography (SLA). In this post, we’ll look at some of the most unique jewelry and rings that can be created with these trendy technologies.
- Ring With Hexagons
This ring is made of gray resin and has an interesting repeating hexagonal pattern on the outside. Its print resolution, or the thickness of each layer, is extremely low at 0.05mm (50 microns), making it unsuitable for many low-cost 3D printers. The designer created it with a Formlabs Form 2 liquid resin desktop 3D printer.
- Flashlight
This isn’t just any ring; it has a built-in flashlight. Specifically, it contains one ultra-bright LED. To create the ring, you’ll need needle nose pliers, a Sharpie marker, a 1 watt ultra-bright LED, two watch batteries, and 2 x 1″ of fine gauge copper wire (24 gauge).
You will need to print the ring in the proper dimensions to fit the intended wearer’s finger. The next step is to print the user’s desired cap.
Afterwards, the circuit must be wired with copper wire, batteries, and an LED. You should test the LED to ensure that the batteries are correctly placed. Be careful not to stare straight at the LED, as it is extremely bright.
The final step is to slide the LED into the cap with your fingers and twist it until it is perfectly positioned. The manufacturer recommended that you slowly twist the ring on and off many times. If you’re a gamer, you should check out https://www.gamingwithswag.com/ for more inspiration of 3D prints.
- Triangular Earrings
These lovely earrings were produced with VECTARY, a free 3D design interface and augmented reality tool. FDM printing was used to create them.
- Witch Hat Earrings
These witch’s hat novelty earrings would be a great addition to any Halloween gathering. They were created using Fusion 360 CAD software and manufactured with a MakerBot Replicator 2. The maker states that these will print good at 0.2mm resolution but look even better at 0.1mm resolution.
- Snakez Bracelet
This unique Snakez bracelet is a great present. It comes in three sizes: small (18 links), medium (20 links), and large (22 links). The maker printed this bracelet with a Minibot 120 at 0.2 mm resolution. Neodymium magnets are superglued to either end of the necklace to keep it together.
- Hummingbird Necklace Pendant
This pendant design depicts a low-polygon hummingbird. It was printed on a Formlabs Form 2 at a layer height of 100 microns (0.1mm) using transparent resin. This necklace can be printed using 3D printing technology such as digital light processing (DLP) or stereolithography (SLA).
- Egyptian Necklace
This Egyptian pharaoh styled necklace is available in a variety of colors. The manufacturer recommends printing it at 0.2 mm layer height, 10% infill, and 10 g filament. It would take about one hour and 20 minutes to print this Egyptian necklace.
This necklace was created using 3D printing technology known as selective laser sintering (SLS). A high-powered laser is used to sinter (soften without melting) the powder particles, resulting in a solid shape.
